The ELECTROCHEMICAL series can be filled with any lubricant and used in virtually all work environments.
These lubricants are intrinsically safe and are approved for all explosive areas. They are also certified by MSHA for use in mines. They can be filled with food-safe lubricant and will work underwater up to 30' (10m) deep! Our units are simple to use, effective, and dramatically reduce the risk of bearing failure by ensuring your machines are continuously lubricated with the right amount of lubricant at the right time.
HOW DOES IT WORK.
ATS ELECTROCHEMICAL LUBERS are single point automatic lubricators utilizing an electrochemical reactor cell that converts electrical energy into safe, inert nitrogen gas. The gas is contained in a hermetically sealed bellows type gas chamber. As the gas is produced, internal pressure builds in the bellows and is applied against the orange piston. The piston then forces the lubricant out of the cylinder and towards the lubrication point. >These units can run empty from 15 days to a year, depending on the setting of the simple user programmable DIP switch. This selection can be changed or disabled at any time.
- single point
- The most reliable unit on the market
- up to 50psi
- Temperature range from -40 °C to +55 °C
- Water resistant to 10m
- Remote mount and remote control options
- ATEX/UL certification (all explosive areas)
- Use with ANY lubricant
- Available in 60, 125, 250 or 475cc
- Recovery rate less than 0.001 %
- Inert and corrosion resistant
- Single-use disposable unit (non-refillable)
